turn on gas fireplace wall key

How to Turn on Gas Fireplace with Wall Key

A gas fireplace is not able to offer you all the atmosphere and warmth of a traditional one. It can burn cleaner than a traditional model. Besides, a gas fireplace doesn’t need an ashy cleanup. You will also not get any soot or ash. It is simple to use these models since they come with a natural gas line and a propane gas tank.

In this post, we will let you know how to turn on it with the key.

Turn On with a Control Panel

Carefully Follow the User Manual

Before turning the fireplace on, you have to follow the user manual from the manufacturer.

Despite the same ignition methods, the model may have a specific feature. If you use it wrongly, it can be dangerous.

If you haven’t got any user manual, it is easy to check it online. Besides, you can also contact the manufacturer. Then, they will offer you a copy.

Place the control panel and Open it

A control panel may be seen in most modern gas fireplaces today. You can find it behind the front screen of your fireplace.

Therefore, you can open or remove the control panel to gain access.

Turn the control knob off

First, you need to find the control knob on the control panel. It must be turned in the off position.

You also should hold your device for at least five minutes.

We recommend you to open all the doors and windows whenever you realize any faint amount of gas. This way is to ventilate the atmosphere.

In case of a big amount of gas, leave your house immediately. After that, contact the fire department in the area.

Wring the shutoff valve

There may be a shutoff valve. Therefore, you can get more control over natural gas.

If you see the device has a shutoff valve, the gas line needs to sit parallel to the handles.

Keep the control knob

You can access the pilot light by keeping the control knob. However, you shouldn’t twist the knob if you are not ready to fire the pilot light.

Press the control knob

If you want to ignite the pilot light, you cannot ignore this step. After that, you have to keep the control knob in place.

Then, press the device’s ignition switch.

If all the previous steps cannot ignite the pilot light, it is time to try again. Another way is to ask a professional for help.

Keep the control knob down

You need to do this step for at least 30 seconds that allows the flame to stay alive. Moreover, you will get a thermocouple device from this step.

Change the control knob to the ON

You need to do that if you want the pilot light to stay on indefinitely. Besides, there is also a remote control that allows you to activate the device whenever you want.

Once finished, remember to change the fireplace’s front screen to remove it when needed.

Warning

  • You should be careful when lighting your gas fireplace due to a hot material constructed with a flammable substance.
  • We recommend you to be vigilant all the time. It will protect you from getting injured. Besides, don’t forget to follow the safety instruction you see in the user manual.

Conclusion

Gas fireplaces are available in natural-gas styles. You can get both the warmth and the comfort of a traditional model.

Besides, it doesn’t give you any problems with chopping wood. It means you haven’t to worry about building up carbon monoxide.

You can also operate it with ease and safety. All the steps above allow you to know how to turn it on with the key. Hopefully, it is useful for you.

Reference:

https://www.hunker.com/12001803/how-to-use-a-gas-fireplace-with-a-key

https://www.homedepot.com/c/ah/how-to-light-a-gas-fireplace/